mga
admin/mod paki erase nalang kung meron na gantong treadz tanx po
FEATURES;
** upgrade fat and slims to 3.80M33-5
** upgrade fats to 3.80M33-5 w/ 1.50 kernel patch
** downgrade phat to 1.50
** upgrade phat straight to 3.52 M33 from Extended Boot Menu then install update 4 no need to downgrade to 1.50
** start up PSP with Ultimate Loader with support For choosing which Pandora's you reach V1, V3, and now V4!
** boot to XMB with pandora battery inserted(Phat Only)
** boot to a full 1.50 from Mem Stick (Phat Only)
** use PSPFiler and other tools (If it requires 1.50 slims can't)
** Recover any bricked psp (Fat or Slim)
All from one memory stick...
The best thing about this, is that all you need to create your pandora battery, and your Ultimate Magic Stick, is a custom firmware enabled psp...No more confusing mspformat commands and IPL manipulation...You dont even need to use your computer-except to transfer the files to your PSP [Vista users rejoice!!]-If you can run a cso from your psp-you too can have the power of Pandora in your hands! All from an easy to use GUI-enabled installer that runs from your psp-
This will eliminate the issues people are having when attempting to create a memory stick using Vista as everything is done from your PSP.
New Features Include:
** MUX 2.1 By KingSebo- A handy file organizer that allows you to have multiple updates on your memory stick such as the 3.90M33 update as well as the 1.50 kernel patch-No more swapping memory sticks!!
** Config Cleaner 2.00 by Smokescreen- Another great app for formatting flash1, backing up or restoring your registry, or cleaning the config.se file in flash1
** Now has the ability to run UPMS installer while under 3.80M33 and 3.90M33 custom firmwares
** New option on the front page of the installer menu for those of you that have fake eBay memory sticks so you can run a proper format on it...(If you do have a fake stick-use that option to properly format your memory stick prior to continuing with the installer)
UPMS SAPHIRE GUIDEbefore you start you will need the ff;
1> A psp with custom firmware already installed (All current custom firmwares can now be used for making the UPMS)
2> A battery you want to convert to a Pandora (yes,it can be converted back)
3> A spare memory stick PRO DUO (256MB-2GB)
4>1.50, 3.71, and 3.80 official $ony firmware updates
getting started1>IF YOU ARE RUNNING ANY CUSTOM THEMES-NOW IS THE TIME TO DISABLE THEM...DO NOT CONTINUE IF YOU HAVE A CUSTOM THEME INSTALLED IN FLASH0-It will cause problems!
2>Format your memory stick(from the psp menu)-{make sure you back up any game saves, MP3's, etc, beforehand}that you plan to use as the UPMS-For those of you with fake memory sticks use the format memory stick option from the UPMS installer
3>Go into USB mode and copy the UPMS installer.cso into your ISO folder
3a>Copy the 1.50 update to the root of your memory stick-named as 150.PBP
3b>Copy the 3.71 update to the root of your memory stick-named as 371.PBP
3c>Copy the 3.80 update to the root of your memory stick-named as 380.PBP
4>Exit USB mode and run the UPMS program from the XMB as you would an ISO or cso. (make sure your NO-UMD is set correctly in recovery mode-SONY NP9660)
5>Follow the steps in order (1-4)from the UPMS program {If you already have a Pandora battery set up, you can skip step #2 in the installer}
-For best results, follow each step in order and as follows:
Step#1-Select the 'sleep fix Multi-IPL' option
Step#2-Backup your eeprom, then create Your battery
Step#3-Install UPMS with utilities (slowest)-It may take a while-Please be patient.
Step#4-Skip this step if you chose 'Install UPMS with utilities'-the programs/files will be installed automatically via Step#3-(If you choose 'Install UPMS without utilities[fastest]'-you will need to go through and install the individual files)
Instructions on how to use UPMS:
FAT PSP:
->Switch off your psp
->Insert the UPMS memory stick
->Hold down the L trigger button
->Insert Pandora battery
->Release L trigger button when the Ultimate Loader menu appears
(If your psp boots to the XMB, it means you didn’t hold the L trigger button down)
SLIM PSP:
->Important: Make sure DCv3/v4 (cemetery) was the last active folder used, or you will have trouble getting the UL menu to light up-some people have had problems in the past attempting to use the UPMS on slim psps because of this...
In which case you will need to do the following:
->Power off and remove your slim battery.
->Push the power switch down so its in the HOLD position
->Insert the UPMS memory stick
->Now hold L and insert your Pandora Battery.
->Release L when the MS light or screen flashes
->Ultimate Loader will then switch the active folder to the cemetery or DCv3/4
->Carefully return the power switch to the middle or the ON position-making sure you dont put the psp in sleep mode
->If you just keep the DCv3/4 cemetery folder always active-you can basically follow the same steps as you would for a fat psp<-
You should then see the main menu (Ultimate Loader)
-From here you can select the following:
-- Load Pandora Extended Menu (Hellcat)
-- Load Pandora Menu Launcher (The Joker)
-- Load Despertar Cementerio v3
-- Load Despertar Cementerio v4
-- Tools Menu
-- Toggle USB (ms0)
Menu Descriptons:
Hellcat Menu-[>>NOT FOR USE ON SLIMS<<
This is the Extended Pandora Boot Menu(EPBM).
NOTE: Make sure your wi-fi switch is OFF or in the down position before using this menu-otherwise you may encounter a blank screen, or some of the menu options will not appear. In which case you'll have to take out and re-insert the battery.
Actions:
-Boot to full firmware (from memorystick)- This will only boot your psp to a full 1.50 firmware for testing, etc..
-Go to Pandora mainmenu-This is where you launch original Pandora v1 (unbrick/downgrade to 1.50)
-Boot PSP from internal flash- This will boot your psp as it normally would-if flash is corrupted, it wont boot.
-Fix flash1:/ (format and create directories)– used for formatting flash1-resets configuration files
-Launch app with flash0:/ access- From here you can select your app by changing the path to point to the 'keycleaner' folder
-Launch CFW installer-This is where you would update to 3.52M33(This needs to be setup first before you can use it-
You do this by doing the following:
-Boot into Ultimate loader
-Select Hellcat menu
-Scroll to 'Launch CFW Installer'
-Press 'O' to choose your path
-You will want to scroll to '352UPDATE' from the drop down menu, and select it using the X button
-It should now say "new path saved"
-Now when you select 'Launch CFW Installer', just press X, and it will take you to the 3.52M33 installer after doing the preparations(on the brown screen-)
-This will install 3.52M33 (first release)
[NOTE: you have to run the m33-4 update from the XMB under the GAME menu when you are done…It’s the one with the calendar])
-USB Options-Pretty straightforward, connects your psp to USB
Joker Menu->NOT FOR USE ON SLIMS<
This is the Pandora Menu Launcher by TheJoker
Actions:
-Despertar del Cementerio v3–This is where you upgrade fat or slim PSP’s to 3.71M33-2 or official Sony 3.71-You can also backup or restore NAND images (NOTE: You will have to run the 1.50 kernel patch (for fat PSP’s only) from the XMB under the GAME menu)
-Pandora main menu– This is where you launch original Pandora v1 to unbrick/downgrade to 1.50, as well as backup or restore NAND images.
-Pandora battery creator-From here you can create a Pandora battery, or restore your Pandora battery to a normal working battery.
-Simple IPL Patch (TA-082/086)-You can patch the IPL with this custom IPL so you can unpatch Key 5 for TA-082/086 (use at your own risk-Recommend using Chilly Willy’s Keycleaner)
-KeyCleaner 1.4–This is Chilly Willy’s KeyCleaner- Where you can analyze, fix, backup, and repair IDstorage keys (for advanced users only)
-IDstorage Manager 1.3-Same as KeyCleaner-You can also edit and create IDstorage keys (again, for advanced users only)
-PSP Filer 4.4–Simple file manager for PSP where you can copy, move, delete, and rename files
-USB Connection–Gain access to your memory stick, flash0, and flash1 folders
-Run (ms0:/kd/home1/EBOOT.PBP)–You can run homebrew apps, etc from here up to 5 spots (home1-5)
Despertar del Cementerio v3-(Standalone)
This is where you upgrade fat or slim PSP’s to 3.71M33-2 or official Sony 3.71-You can also backup or restore NAND images (NOTE: You will have to run the 1.50 kernel patch (for fat PSP’s only) from the XMB under the GAME menu)
********************************************************************
Despertar Cementerio v4-(Standalone)
This is what is used to update your psp to 3.80M33-5 custom firmware, or official 3.80 firmwares as well as dumping and restoring NAND images-Again you will have to run the 1.50 kernel patch from the XMB menu after you update to 3.80M33-5 (fats only)
Tools Menu (by jasOnuk)
*Launch elf files from this menu
*Included are two Elf files. NANDManager and NANDTool
*Elf Creation
1.Use PBP unpackerand extract the data.psp file
2.Rename data.psp to “anything you like”.elf
If named “anything”_FAT.elfor “anything”_SLIM.elfit will only work for that model and will be grayed out for the other
3.Place your new elf in the elf folder
4.Run app and launch elf
Setting Up Extra Memory Sticks:
If you wish to use additional memory sticks but leave your battery set up as a Pandora so that you can leave the one that contains the U.M.P.S files alone-
Just do the following:
1> Connect to your AC supply-sans battery.
2> Insert the memory stick you wish to use.
3> Switch on you psp.
4> Format the memory stick from within the xmb.
5> Go to the USB icon and connect to the computer.
6> Open up the ISO folder and place the UPMS installer cso inside.
7> Disconnect from the computer.
8> Go to the Game icon in the xmb and run the installer.
9> Only run step #1,and choose the multi ipl option, this will then allow you to use this memory stick as a normal one with your Pandora battery.
(you do not need to install all of the files-Just run step#1 and exit).
IF YOU ARE USING A SLIM PSP AND BATTERY FOR YOUR U.P.M.S YOU MUST RETURN THE BATTERY BACK TO ITS NORMAL MODE OTHER WISE YOUR PSP WILL NOT SWITCH ON
WARNING
Be careful if installing MaxSafe, while testing we came across a few issues using it to downgrade a 3.71 psp to 1.50, it will not write the IPL and you will end up with a brick.
You have been warned.
-Enjoy!!
and special thanks for those people behind pinoypsp.com without them im still innocent in psp.thanks guysFor more information and to chat with the guys that brought you this marvelous program, be sure to visit http://www.upms-project.com !drinks !band !rock !clapping !clapping !dance !dance !uumppahhh !amen
